Disclosure: Tried and Kept is reader-supported. If you buy through links on this site, we may earn a commission at no extra cost to you. This never changes what we recommend. Read our full disclosure.
Last checked: 25 October 2026. This comparison is research-based. It draws on Creality’s and Bambu Lab’s official product pages, spec sheets and store listings, plus other public information from the manufacturers. We haven’t tested either printer hands-on, so we stick to what the makers publish and explain what those numbers mean for a beginner. Here’s how we review.
If you’re buying your first 3D printer on a tight budget, two names come up again and again: the Creality Ender-3 V3 SE and the Bambu Lab A1 mini. At the time of writing, they sit only about $20 apart on the makers’ own US stores. But they’re built on very different ideas.
The Ender-3 V3 SE is the latest version of the classic Ender-3: a bigger bed, a simple knob-and-screen interface and SD card printing. The A1 mini is a compact, connected machine that runs its own calibrations before every print and can grow into multicolor printing later. So the real question isn’t which one is “better.” It’s which one fits the way you’ll actually use it.
We already compared the A1 mini with its bigger siblings in our Bambu Lab A1 mini vs A1 vs P1S guide. This guide looks at it from the other direction: the A1 mini against the cheapest serious rival from Creality.
Quick answer
- Choose the Creality Ender-3 V3 SE if you want the bigger build volume for the money (220 x 220 x 250 mm), you’re fine moving files on an SD card, and you like the idea of a printer you can learn on, tinker with and upgrade.
- Choose the Bambu Lab A1 mini if you want the most hands-off start, Wi-Fi and app control, a built-in camera, faster rated speeds, and the option to add the AMS lite for multicolor prints. Just be sure the smaller 180 x 180 x 180 mm build volume is enough for what you want to make.
Ender-3 V3 SE vs A1 mini: specs side by side
The figures below come from Creality’s Ender-3 V3 SE support/specs page and its official SE vs KE comparison, and from Bambu Lab’s A1 mini store page and technical specification sheet (TDS). Prices are what each maker’s US store listed when we checked on 25 October 2026. Prices change often, so check the current price before you buy.
| Spec | Creality Ender-3 V3 SE | Bambu Lab A1 mini |
|---|---|---|
| Listed price (official US store, 25 Oct 2026) | $199.00 (creality.com) | $219.00 (printer only, Bambu Lab US store) |
| Build volume | 220 x 220 x 250 mm | 180 x 180 x 180 mm |
| Motion system | Cartesian (i3-style gantry, bed moves on Y) | Cartesian bed slinger with metal linear rails |
| Max print speed | 250 mm/s (typical 180 mm/s) | 500 mm/s toolhead speed |
| Max acceleration | 2,500 mm/s² | 10,000 mm/s² |
| Max nozzle temperature | 260°C | 300°C |
| Max bed temperature | 100°C | 80°C |
| Nozzle | 0.4 mm, copper alloy/brass | 0.4 mm stainless steel (0.2, 0.6, 0.8 mm optional) |
| Extruder | “Sprite” direct drive | Direct drive, all-metal hot end, steel gears |
| Build surface | PC spring steel sheet | Bambu Textured PEI Plate |
| Leveling and calibration | CR Touch auto leveling plus strain sensor for auto Z offset | Full-auto: Z offset, bed leveling, vibration resonance and flow (pressure advance) before each print |
| Filaments the maker lists | PLA, PETG, TPU (95A) | Ideal: PLA, PETG, TPU, PVA. Not recommended: ABS, ASA, PC, PA and fiber-filled |
| Screen | 3.2″ color screen with knob | 2.4″ IPS touchscreen |
| File transfer / connectivity | SD card | Wi-Fi (cloud or LAN mode), microSD |
| Camera | No | Yes, low-frame-rate camera with timelapse |
| Multicolor option | No | Yes, with the AMS lite (sold as the A1 mini Combo) |
| Printer dimensions | 349 x 364 x 490 mm (Creality comparison) | 347 x 315 x 365 mm |
| Net weight | 7.12 kg | 5.5 kg |
| Power | 350 W rated | 150 W max |
| Setup | About 90% pre-assembled; Creality says printing can start within about 20 minutes | Pre-assembled and pre-tuned; Bambu says about 20 minutes to the first print |
One note on Creality’s numbers: its own pages don’t always agree on small details. For example, some Creality materials list the SE’s dimensions or weight slightly differently, and its SE vs KE comparison lists a filament runout sensor as an optional upgrade on the SE. If a detail like that matters to you, check the exact listing you’re buying from.
Build volume: the Ender’s biggest advantage
This is the clearest win for the Ender-3 V3 SE. Its 220 x 220 x 250 mm volume works out to about 12.1 liters of build space. The A1 mini’s 180 x 180 x 180 mm cube is about 5.8 liters. In other words, the Ender gives you roughly twice the space to print in.
Does that matter? It depends on what you want to make. For a lot of beginner projects, like figurines, desk organizers, replacement clips, cable holders, game pieces and small household fixes, 180 mm (about 7.1 inches) in each direction is plenty. But if you know you want to print helmets, cosplay pieces, larger planters, or long parts in one go, the extra 40 mm on each side of the bed and the extra 70 mm of height on the Ender add up quickly. You can split big models into pieces on either printer, but that adds gluing and finishing work.
A simple test: think of the three biggest things you’d want to print in your first year. If any of them is longer than about 18 cm on a side, the Ender-3 V3 SE (or a bigger Bambu, like the A1) is the safer pick.
Ease of use: the A1 mini’s biggest advantage
Both printers have taken a lot of the old pain out of 3D printing. Neither asks you to level the bed by turning knobs and sliding a sheet of paper under the nozzle. The Ender-3 V3 SE uses a CR Touch probe for auto leveling and a strain sensor to set the Z offset automatically, and it can load and unload filament at the tap of a button.
The A1 mini goes further. According to Bambu Lab, it calibrates the Z offset, bed level, vibration resonance on both axes and nozzle pressure (flow) automatically before every print job. It also checks belt tension through its vibration calibration and tells you if a belt needs adjusting. For a beginner, that means fewer of the classic problems like first layers that won’t stick, ringing on corners, and blobs where the flow is off, and fewer settings to learn before you get a good result.
The Ender-3 V3 SE arrives about 90% assembled, so you’ll fit a few parts with the included tools. The A1 mini arrives assembled and tuned. Both makers say you can be printing in about 20 minutes, but the Ender will feel more like a “build it, then learn it” machine, while the A1 mini is closer to “plug it in and print.”
Speed and print quality
On paper, the A1 mini is much faster. Bambu Lab rates its toolhead at up to 500 mm/s with 10,000 mm/s² acceleration. Creality rates the Ender-3 V3 SE at up to 250 mm/s with 2,500 mm/s² acceleration and a typical speed of 180 mm/s.
Keep in mind that maximum speed figures are best-case numbers. Real print times depend on the model, the filament, the layer height and the slicer profile. Acceleration often matters more than top speed for small, detailed parts, because the toolhead rarely gets to full speed on short moves. That’s where the A1 mini’s four-times-higher acceleration rating and its automatic vibration compensation give it a real edge. Bambu also uses an eddy current sensor to measure nozzle pressure and adjust flow on the fly, which it says keeps corners smooth.
The Ender-3 V3 SE is no slouch compared with the Ender-3 printers of a few years ago. Creality pairs its Sprite direct drive extruder with dual Z-axis lead screws and 8 mm steel linear shafts on the Y-axis to keep the gantry and bed stable. It’s just not chasing the same speeds.
Materials: what each one can print
For most beginners, this is closer than it looks. Both printers are made for the everyday filaments: PLA, PETG and TPU. Both use direct drive extruders, which helps with flexible TPU.
The A1 mini’s hot end can reach 300°C versus 260°C on the Ender. But its bed only goes to 80°C, and Bambu Lab says plainly that ABS, ASA, PC, nylon (PA) and fiber-filled filaments are “not recommended” on the A1 mini. The Ender’s bed reaches 100°C, yet Creality still lists only PLA, PETG and TPU as supported. Neither printer has an enclosure, so neither is a good choice if you already know you want to print ABS or ASA regularly. For that, look at an enclosed printer like the Bambu Lab P1S, which we cover in our A1 mini vs A1 vs P1S comparison.
One practical difference is the build surface. The A1 mini ships with Bambu’s Textured PEI plate. The Ender-3 V3 SE ships with a PC (polycarbonate) spring steel sheet. In its own comparison article, Creality suggests upgrading the SE to a PEI sheet because the PC sheet can bond too strongly with some higher-temperature filaments. That’s a small extra cost to budget for if you plan to print a lot of PETG.
Connectivity, apps and the camera
Here the two printers feel like they’re from different eras. The Ender-3 V3 SE prints from an SD card: you slice the model on your computer (Creality Print, Cura and other slicers are supported), copy the file to the card and walk it over to the printer. There’s no Wi-Fi on the SE. Creality’s step-up model, the Ender-3 V3 KE, adds Wi-Fi.
The A1 mini connects over Wi-Fi. You can send prints from Bambu Studio on your computer, or from the Bambu Handy app and Bambu’s MakerWorld model library. The built-in camera lets you check on a print from another room and record timelapses. If you don’t want cloud printing, Bambu offers a LAN mode that keeps control and live view on your local network, and the camera can be physically blocked.
If you like simple, offline machines, the SD card workflow isn’t a dealbreaker. Plenty of people prefer it. But if you want to start a print from your phone or keep an eye on a long job while you’re out of the room, the A1 mini is the more convenient day-to-day printer.
Multicolor printing
The A1 mini can be bought as the A1 mini Combo, which adds the AMS lite, a four-spool unit that swaps filaments automatically during a print for multicolor or multi-material models. Bambu also notes that the A1 mini can connect to its enclosed AMS units with an AMS hub accessory. The Ender-3 V3 SE has no official multicolor add-on. If multicolor printing is part of the appeal for you, that alone decides it. Check the Combo’s current price on Bambu Lab’s store, since bundle pricing changes often.
Noise, space and power
Bambu Lab says the A1 mini’s active motor noise canceling and silent mode can bring it under 48 dB (its store page lists 49 dB), which it describes as one of the quietest 3D printers on the market. Creality doesn’t publish a comparable noise figure for the Ender-3 V3 SE. Check recent owner reports if noise is a priority for you.
For space, the A1 mini is the smaller and lighter machine: 347 x 315 x 365 mm and 5.5 kg. Creality lists the Ender-3 V3 SE at 349 x 364 x 490 mm and 7.12 kg. Both are bed slingers, which means the bed moves back and forth, so leave extra clearance in front of and behind either printer. Put it on a solid table or desk, not a wobbly shelf. On power, the A1 mini lists a 150 W maximum, while the Ender’s rated power is 350 W, mostly because of its larger, hotter bed.
Pros and cons
Creality Ender-3 V3 SE
Pros
- About twice the build volume of the A1 mini (220 x 220 x 250 mm)
- Lowest price of the two on the makers’ own stores when we checked
- CR Touch auto leveling and automatic Z offset
- Sprite direct drive extruder that handles PLA, PETG and TPU
- Bed heats to 100°C
- Simple, offline workflow and open to common slicers like Cura
Cons
- No Wi-Fi, app control or camera; files go on an SD card
- Lower rated speed and acceleration
- Requires light assembly
- PC build sheet; Creality itself suggests a PEI upgrade for some filaments
- No official multicolor option
Bambu Lab A1 mini
Pros
- Fully automatic calibration before every print, including flow and vibration
- Arrives assembled and tuned
- Much higher rated speed (500 mm/s) and acceleration (10,000 mm/s²)
- Wi-Fi, app control, LAN mode and a built-in camera
- Multicolor upgrade path with the AMS lite
- Compact and quiet by Bambu’s figures, with a 2-year warranty listed on the US store
Cons
- Small 180 x 180 x 180 mm build volume
- Bed tops out at 80°C; ABS, ASA, nylon and fiber-filled filaments not recommended
- Costs a little more than the Ender at list price
- Works best inside Bambu’s own software ecosystem
How to choose: buying criteria that actually matter
- What you’ll print. Measure your three biggest planned projects. If they fit in an 18 cm cube, the A1 mini works. If not, the Ender’s bigger volume is worth more than any speed advantage.
- How much you want to tinker. If learning how a printer works is part of the fun, the Ender-3 V3 SE is a classic way to do it. If you just want parts to come off the bed, the A1 mini’s automation saves you time and frustration.
- How you’ll send prints. SD card only (Ender) versus Wi-Fi, app and camera (A1 mini). Be honest about whether walking a card to the printer will bother you after the first month.
- Materials. For PLA, PETG and TPU, both are fine. For ABS, ASA or nylon, skip both and look at an enclosed printer.
- Total cost, not just the sticker. Budget for filament, a spare nozzle or two, and possibly a PEI sheet for the Ender. If multicolor is on your wish list, compare the A1 mini Combo’s price with the printer alone.
- Warranty and support. Bambu’s US store lists a 2-year warranty and 30-day returns for the A1 mini. Check the warranty terms on whichever Creality listing you buy the Ender-3 V3 SE from, as they can vary by seller and region.
Which one will you keep?
For most first-time buyers who want to print small to medium objects with as little fuss as possible, the Bambu Lab A1 mini is the easier printer to live with. The automatic calibration, Wi-Fi and camera remove a lot of the friction that makes people give up on 3D printing, and the AMS lite gives it room to grow.
But the Creality Ender-3 V3 SE makes a strong case on value. You get far more build space for slightly less money, a capable direct drive extruder and auto leveling. If you need that space, or you like the idea of learning the craft on a simpler, open machine, it’s the one you’re more likely to keep using.
If you’re stuck between them because the A1 mini feels too small, there’s a third option: Bambu’s full-size A1, which keeps the A1 mini’s automation with a 256 x 256 x 256 mm build volume. We compare it in our A1 mini vs A1 vs P1S guide.
FAQ
Is the Bambu Lab A1 mini better than the Ender-3 V3 SE for beginners?
For most beginners, yes, mainly because it calibrates itself before every print, arrives assembled, and adds Wi-Fi and a camera. The Ender-3 V3 SE is still beginner-friendly thanks to its auto leveling, but it’s more manual overall.
Which printer has the bigger build volume?
The Ender-3 V3 SE: 220 x 220 x 250 mm versus 180 x 180 x 180 mm on the A1 mini. That’s roughly twice the volume.
Does the Ender-3 V3 SE have Wi-Fi?
No. Creality lists SD card file transfer for the SE. If you want Wi-Fi from Creality’s Ender-3 V3 line, the Ender-3 V3 KE adds it.
Can either printer print ABS?
Neither is a good fit. Bambu Lab lists ABS as not recommended on the A1 mini, and Creality lists only PLA, PETG and TPU as supported filaments for the Ender-3 V3 SE. Neither has an enclosure.
Can the A1 mini print in multiple colors?
Yes, with the AMS lite, which comes in the A1 mini Combo. The Ender-3 V3 SE doesn’t have an official multicolor system.
How much do they cost?
When we checked on 25 October 2026, Creality’s site listed the Ender-3 V3 SE at $199.00 and Bambu Lab’s US store listed the A1 mini at $219.00 for the printer alone. Both prices change often with sales, so check the current price before buying.
Have you tested these printers?
No. This is a research-based comparison built from Creality’s and Bambu Lab’s official specifications, store listings and published documentation. We’ll update it if either maker changes the specs.
Sources
- Creality, Ender-3 V3 SE product page (features, speed, extruder, price): creality.com
- Creality, Ender-3 V3 SE support page and specifications: creality.com
- Creality Store, “Ender 3 V3 SE vs KE” comparison (dimensions, weight, build surface, file transfer): store.creality.com
- Bambu Lab, A1 mini product page (calibration, noise, LAN mode, AMS lite): bambulab.com
- Bambu Lab US Store, A1 mini listing and tech specs (price, warranty, filaments): us.store.bambulab.com
- Bambu Lab, A1 mini Technical Specification (TDS) PDF: store.bblcdn.com